System Palette
Epoxy, zinc-rich, polyurethane stacks
Acrylic and hybrid chemistries for clean air permits
Epoxy and hybrid assembly bonding systems
Elastomeric, fire-retardant, and fillers
Cleaners, conversion coatings, maintenance kits
TDS Quick Download
Find data sheets instantly
Search by product, chemistry, or industry and jump to the portal.
Application Best Practices: Prep, DFT, Cure
Consistent performance starts with consistent application. Here’s how to tighten process control.
Checklist
- Surface prep to NACE/SSPC requirements
- Mixing ratios, induction times, and temperature windows
- DFT measurement at each layer
- Cure verification before turnover
Specification Kit
Color-Coded Data Sheets and Inspection Steps
Every family carries a matching swatch, label, and TDS/SDS bundle to keep purchasers, applicators, and inspectors synchronized.
- Surface prep and DFT targets for QA/QC teams
- Mixing, pot life, and cure windows by product
- Custom formulation pathway for unique substrates
Fast Actions
Top Lessons
Prep is Everything
Adhesion failures often trace back to inadequate blast profile or contaminants. Follow TDS surface prep guidance exactly.
DFT Discipline
Measure DFT per layer; overbuild can trap solvents, underbuild can reduce life. Target windows matter.
Cure Validation
Use cure indicators or hardness checks before topcoating; rushing leads to gloss loss or adhesion issues.
Environmental Controls
Temperature and humidity influence open time, pot life, and cure; adjust work plans accordingly.
LPTHC Support
- Application guides embedded in every TDS
- On-site training for spray, roll, dip, and automated systems
- Inspection checklists for DFT, gloss, adhesion, and cure
- SDS with PPE, ventilation, and emergency steps